Industrial News Buzz - Master Bond fiberglass adhesive EP33 facilitates the reliable bonding of fiberglass to a variety of different substrates. It has been specially designed to overcome CTE mismatch complications. Curing at room temperature, it produces durable, high strength, and tough bonds between fiberglass, wood, metals, vulcanized rubbers and many plastics.

 

The cured fiberglass adhesive composition is an excellent electrical insulator with superb dielectric performance. It maintains an impressive strength profile of 220 Kg/cm² (3100 psi) in shear even after exposure to temperatures in the 205-235° C (400-450° F) range. Curing can be accelerated to as short as 1 hour at 95°C.

 

Master Bond's fiberglass adhesive EP33 is remarkably resistant to thermal cycling, high radiation levels and chemicals, including water, oil, and most organic solvents. This unique combination of properties advocates EP33's use in the electronic, electrical, computer, construction, metalworking, automotive and chemical industries. It is available in premixed bi-packs and cartridge/gun packaging for convenient dispensing as well as in standard pint, quart, gallon and 5 gallon containers.

 

About Master Bond's Plastic Adhesives:

 

Master Bond's fiberglass bonding adhesives include epoxy, silicone, polyurethane, acrylic, cyanoacrylate and latex systems. They are available in a range of viscosities, specific gravity and colors for bonding ABS, acrylic, PVC, vinyl, polypropylene, polyethylene & other TPO, thermoplastic olefin, plastics. We have primers for increased cure speed & adhesion of certain low surface energy plastics including grades of polypropylene, polyethylene and special adhesive products for TPO's without need for primers or special surface preparation.

 

Learn more about Master Bond's Plastic Adhesives:  contact: Technical Support. Phone: 201-343-8983 Fax: 201-343-2132 Be sure to mention Industrial News Buzz!